1.20.1 / 進階內容 / 鍛鐵爐

鍛鐵爐

鍛鐵爐


The Bloomery is a device used to smelt Iron Ore into Iron Blooms which can be worked into Wrought Iron. The iron ores are Hematite, Limonite, and Magnetite. These ores melt into Cast Iron rather than Wrought Iron. All iron-bearing items melt into Cast Iron. To turn them into usable iron, the bloomery is needed. Any iron item can be used in the bloomery, including iron tools and cast iron ingots!

The bloomery is made from 8 Bronze Double Sheets.

鍛鐵爐

多方塊結構: tfc:bloomery

最基礎的鍛鐵爐結構。鍛鐵爐方塊可以用右鍵開啟或關閉。

The bloomery can contain up to a maximum of 48 Inputs, with 16 of each item per layer of the chimney. To add layers to the chimney, stack up two more layers of stone blocks.

To add items to the bloomery, climb up to the top and throw items inside. A tower of grey ore should form.

tfc:textures/gui/book/tutorial/bloomery_hole.png

將物品新增到鍛鐵爐中。

The bloomery consumes 2 Charcoal, and 100 mB of Cast Iron to produce one Bloom. After filling the bloomery with a combination of Charcoal and Ore, light the bloomery block, and wait 15 hours for the bloomery to smelt. When the bloomery shuts off, it leaves behind a Bloom block. This contains Raw Iron Blooms which can be obtained by mining the Bloom repeatedly with a pickaxe.

方坯
Block Visualization

A large Bloom.

第二級

生鐵方坯還必須在上打造成精鐵方坯

第二級

上進一步打造精鐵方坯就能獲得鍛鐵錠了。

鐵匠的筆記

  • 如果投入鍛鐵爐的物品超出了它的所能處理的數量,它就會從鍛鐵爐門口吐出來。
  • 如果要取回投入鍛鐵爐中的物品,不要試圖挖掘塔中的熔融物,直接把鍛鐵爐方塊挖掉即可。
  • 方坯只會熔化成鑄鐵,而不是鍛鐵。方坯必須經過錘鍊才能變成鍛鐵!